Dell PowerConnect M6348 Cli Reference Manual page 127

Please enter the IP subnet mask (A.B.C.D or /nn). [255.255.255.0]:
Step 4:
Finally, setup the default gateway. Please enter the IP address of
the gateway from which this network is reachable. [0.0.0.0]:
This is the configuration information that has been collected:
User Account setup = root
Password = ********
Management IP address = 192.168.2.1 255.255.255.0
Default Gateway = 0.0.0.0
Operation Mode = Normal
Step 5:
Do you want to select the operational mode as Simple Mode? [Y/N] n
Final Step:
If the information is correct, please select (Y) to save the
configuration, and copy to the start-up configuration file. If the
information is incorrect, select (N) to discard configuration and
restart the wizard: [Y/N] y
Thank you for using Dell Easy Set up Wizard. You will now enter CLI
mode.
Applying Interface configuration, please wait...
console>
Using CLI Functions and Tools
The CLI has been designed to manage the switch's configuration file system and to manage
switch security. A number of resident tools exist to support these and other functions.
Configuration Management
All managed systems have software images and databases that must be configured, backed up
and restored. Two software images may be stored on the system, but only one of them is active.
The other one is a backup image. The same is true for configuration images, which store the
configuration parameters for the switch. The system has three configuration images. One image
is a memory-only image and is the current configuration image for the switch. The second
image is the one that is loaded by the system when it reboots. There is one backup configuration
image. The system also provides methods to back up these images to a remote system.
127