Dell PowerConnect M6348 Cli Reference Manual page 179

Default Configuration
Forward-unregistered
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
In this example all VLAN1 Multicast packets are forwarded.
console(config-if-vlan1)#bridge multicast forward-all
bridge multicast forward-unregistered
Use the bridge multicast forward-unregistered command in Interface Configuration mode to
enable the forwarding of unregistered multicast addresses.
Syntax
bridge multicast forward-unregistered
Default Configuration
Forward-unregistered
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
drop
If routers exist on the VLAN, do not change the unregistered multicast addresses state to
on the routers ports.
NOTE: Do not use the bridge multicast forbidden forward-unregistered command with the bridge
multicast forward-unregistered command on the same interface.
Example
The following example displays how to enable forwarding of unregistered multicast addresses.
console(config-if-vlan1)#bridge multicast forward-unregistered
179