Syntax
areaid
show ipv6 ospf range
areaid — Identifies the OSPF area whose ranges are being displayed.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays information about the area ranges for area 1.
console#show ipv6 ospf range 1
Area ID
IPv6 Prefix/Prefix Length
--------- -------------------------
show ipv6 ospf stub table
Use the show ipv6 ospf stub table command in Privileged EXEC mode to display the OSPF stub
table. The information below will only be displayed if OSPF is initialized on the switch.
Syntax
show ipv6 ospf stub table
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Lsdb Type
--------------- -------------
Advertisement
837