Dell PowerConnect M6348 Cli Reference Manual page 101

Command
show sflow sampling
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 49.
SNMP
Command
show snmp
show snmp engineID
show snmp filters
show snmp groups
show snmp users
show snmp views
show trapflags
snmp-server community
snmp-server community-group
snmp-server contact
snmp-server enable traps
snmp-server engineID local
snmp-server filter
snmp-server group
snmp-server host
snmp-server location
snmp-server enable traps
authentication
snmp-server v3-host
snmp-server user
snmp-server view
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 49.
Description
Displays the sFlow sampling instances created on the
switch.
Description
Displays the SNMP status.
Displays the SNMP engine ID.
Displays the configuration of filters.
Displays the configuration of groups.
Displays the configuration of users.
Displays the configuration of views.
Shows the status of the configurable SNMP traps.
Sets up the community access string to permit access to
SNMP protocol.
Maps SNMP v1 and v2 security models to the group name. GC
s up a system contact (sysContact) string.
Set
Enables SNMP traps globally or enables specific SNMP
traps.
Specifies the Simple Network Management Protocol
(SNMP) engine ID on the local switch.
Creates or updates an SNMP server filter entry.
Configures a new SNMP group or a table that maps SNMP
users to SNMP views.
Specifies the recipient of SNMP notifications.
the system location string.
Sets
Enables the switch to send SNMP traps when
authentication failed.
Specifies the recipient of SNMPv3 notifications.
onfigures a new SNMP Version 3 user.
C
Creates or updates a Simple Network Management Protocol
(SNMP) server view entry.
Mode*
PE
Mode*
PE
PE
PE
PE
PE
PE
PE
GC
GC
GC
GC
GC
GC
GC
GC
GC
GC
GC
GC
101