Dell PowerConnect M6348 Cli Reference Manual page 607

Command line interface guide
Hide thumbs Also See for PowerConnect M6348:
Table of Contents

Advertisement

User Guidelines
This command has no user guidelines.
Example
The following example resets the host interface status parameters of the IGMP Proxy router.
console(config)#interface vlan 15
console(config-if-vlan15)#ip igmp-proxy reset-status
ip igmp-proxy unsolicited-report-interval
Use the ip igmp-proxy unsolicited-report-interval command in Interface Configuration mode
to set the unsolicited report interval for the IGMP Proxy router. This command is valid only if
IGMP Proxy on the interface is enabled.
Syntax
seconds
ip igmp-proxy unsolicited-report-interval
seconds — Unsolicited report interval. (Range: 1-260 seconds)
Default Configuration
The default configuration is 1 second.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example sets 10 seconds as the unsolicited report interval for the IGMP Proxy
router.
console(config)#interface vlan 15
console(config-if-vlan15)#ip igmp-proxy unsolicited-report-
interval 10
607

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents