Router-Id - Dell PowerConnect M6348 Cli Reference Manual

no redistribute {static | connected} [
metric — Metric value used for default routes. (Range: 0-16777214)
•
tag — Tag. (Range: 0-4294967295)
•
Default Configuration
2 is the default value for metric-type, 0 for
Command Mode
Router OSPFv3 Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the OSPFv3 protocol to allow redistribution of routes from
the specified source protocol/routers.
console(config)#ipv6 router ospf
console(config-rtr)#redistribute connected

router-id

Use the router-id command in Router OSPFv3 Configuration mode to set a 4-digit dotted-
decimal number uniquely identifying the Router OSPF ID.
Syntax
router-id
router-id
router-id — Router OSPF identifier. (Range: 0-4294967295)
•
Default Configuration
This command has no default configuration.
Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
This command has no user guidelines.
822
metric tag
] [metric-type] [
tag
.
]