The following table shows the information the command displays:
Field
Capacity
Used
Static addresses
Dynamic addresses The number of addresses in the multicast address table that were learned
Forbidden addresses The number of addresses in the multicast address table that are forbidden IP
show ip mcast
Use the show ip mcast command in Privileged EXEC mode to display the system-wide
multicast information.
Syntax
show ip mcast
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays system-wide multicast information.
console#show ip mcast
Admin Mode..................................... Enabled
Protocol State................................. Non-Operational
Table Max Size ................................ 256
Protocol....................................... PIMDM
Multicast Forwarding Cache Entry Count ........ 0
728
Description
The maximum number of addresses that can be stored in the multicast address
table.
The total number of addresses in the multicast address table.
The number of addresses in the multicast address table that are static IP addresses.
dynamically.
addresses.