Dell PowerConnect M6348 Cli Reference Manual page 314

console(config-if-1/g1)#ipv6 traffic-filter DELL_IP6 in
• Bind the IPv6 ACL named myipv6acl to the physical interface 1/g1 in the outbound direction.
console(config-if-1/g1)#ipv6 traffic-filter myipv6acl out
• Bind the IPv6 ACL named myipv6acl to the LAG interface 1 in the outbound direction.
console(config-if-ch1)#ipv6 traffic-filter myipv6acl out
• Bind the IP ACL named myipacl to the VLAN interface 999 in the outbound direction.
•
console(config-if-vlan999)#ipv6 traffic-filter myipv6acl out
show ipv6 access-lists
The show ipv6 access-lists command displays an IPv6 access list and all of the rules that are
defined for the IPv6 ACL. Use the [name] parameter to identify a specific IPv6 ACL to display.
Syntax
show ipv6 access-lists [name]
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays configuration information for the IPv6 ACLs.
console#show ipv6 access-lists
Current number of all ACLs: 1
IPv6 ACL Name
------------------------------- ----- --------- -------------------- -------------
STOP_HTTP
console#show ipv6 access-lists STOP_HTTP
314
Maximum number of all ACLs: 100
Rules Direction
2 inbound 1/g1
Interface(s) VLAN(s)