Dell PowerConnect M6348 Cli Reference Manual page 927

show sntp configuration
Use the show sntp configuration command in Privileged EXEC mode to show the configuration
of the Simple Network Time Protocol (SNTP).
Syntax
show sntp configuration
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the current SNTP configuration of the device.
console#show sntp configuration
Polling interval: 64 seconds
MD5 Authentication keys:
Authentication is not required for synchronization.
Trusted keys:
No trusted keys.
Unicast clients: Disable
Unicast servers:
Server
---------
10.27.128.21
Key
-----------
Disabled
Polling
-----------
Enabled
Priority
----------
1
927