Dell PowerConnect M6348 Cli Reference Manual page 561

arp resptime
Use the arp resptime command in Global Configuration mode to configure the ARP request
response timeout. To return the response timeout to the default value, use the no form of this
command.
Syntax
integer
arp resptime
no arp resptime
integer — IP ARP entry response time out. (Range: 1-10 seconds)
•
Default Configuration
The default value is 1 second.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example defines a response timeout of 5 seconds.
console(config)#arp resptime 5
arp retries
Use the arp retries command in Global Configuration mode to configure the ARP count of
maximum requests for retries. To return to the default value, use the no form of this command.
Syntax
integer
arp retries
no arp retries
integer — The maximum number of requests for retries. (Range: 0-10)
•
Default Configuration
The default value is 4 retries.
561