Show Fiber-Ports Optical-Transceiver - Dell PowerConnect M6348 Cli Reference Manual

interface — A valid Ethernet port. The full syntax is unit / port.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
The copper-related commands do not apply to the stacking, CX-4, or 10GBaseT ports associated
with these plug-in modules.
The maximum length of the cable for the Time Domain Reflectometry (TDR) test is 120
meters.
NOTE: This command is supported on
Example
The following example displays the last TDR tests on all ports.
console#show copper-ports tdr
Port Result
---- --------
1/g1 OK
1/g2 Short
1/g3 Test has not been preformed
1/g4 Open
1/g5 Fiber -

show fiber-ports optical-transceiver

Use the show fiber-ports optical-transceiver command in Privileged EXEC mode to display the
optical transceiver diagnostics.
Syntax
show fiber-ports optical-transceiver [
interface — A valid Ethernet port. The full syntax is unit / port.
•
PCM8024 10G BaseT ports.
Length [meters]
---------------
50
128
-
interface
]
Date
---------------
13:32:00 23 July 2004
13:32:08 23 July 2004
987