Split-Horizon - Dell PowerConnect M6348 Cli Reference Manual

Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays general information for each RIP interface.
console#show ip rip interface brief
Interface IP Address
---------- ----------
vlan1 0.0.0.0
vlan2 0.0.0.0

split-horizon

Use the split-horizon command in Router RIP Configuration mode to set the RIP split horizon
mode. Use the no form of the command to return the mode to the default value.
Syntax
split-horizon {none | simple | poison}
no split-horizon
• none — RIP does not use split horizon to avoid routing loops.
• simple — RIP uses split horizon to avoid routing loops.
• poison — RIP uses split horizon with poison reverse (increases routing packet update size).
Default Configuration
Simple is the default configuration.
Command Mode
Router RIP Configuration mode.
User Guidelines
This command has no user guidelines.
Send Receive
Version Version
-------- ----------- --------- ----------
RIP-2 Both
RIP-2 Both
RIP Link
Mode State
Disable Down
Disable Down
869