Ipv6 Mld-Proxy Reset-Status; Ipv6 Mld-Proxy Unsolicit-Rprt-Interval - Dell PowerConnect M6348 Cli Reference Manual

Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-vlan3)#ipv6 mld-proxy

ipv6 mld-proxy reset-status

Use the ipv6 mld-proxy reset-status command to reset the host interface status parameters of
the MLD Proxy router. This command is only valid when MLD Proxy is enabled on the
interface.
Syntax
ipv6 mld-proxy reset-status
Command Mode
Interface Configuration (VLAN) mode.
Default Configuration
There is no default configuration for this command.
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-vlan3)#ipv6 mld-proxy reset-status

ipv6 mld-proxy unsolicit-rprt-interval

Use the ipv6 mld-proxy unsolicit-rprt-interval command to set the unsolicited report interval
for the MLD Proxy router. This command is only valid when MLD Proxy is enabled on the
interface. Use the "no" form of this command to reset the MLD Proxy router's unsolicited
report interval to the default value.
Syntax
interval
ipv6 mld-proxy unsolicited-report-interval
671