Sflow Polling - Dell PowerConnect M6348 Cli Reference Manual

User Guidelines
This command has no user guidelines
Example
console(config)#sflow 1 destination owner 1 timeout 2000
console(config)#sflow 1 destination maxdatagram 500
console(config)#sflow 1 destination 30.30.30.1 560

sflow polling

Use the sflow polling command to enable a new sflow poller instance for this data source if
rcvr_idx is valid. Use the "no" form of this command to reset poller parameters to the defaults.
Syntax
rcvr-index
sflow polling ethernet
no sflow rcvr-index polling ethernet
rcvr-index — The sFlow Receiver associated with the poller (Range: 1–8).
•
interfaces — The list of interfaces to poll.
•
poll-interval — The sFlow instance polling interval. A poll interval of 0 disables counter
•
sampling. A value of
0–86400).
Default Configuration
There are no pollers configured by default.
The default poll interval is 0.
Command Mode
Global Configuration mode.
User Guidelines
This command has no user guidelines.
Example
console(config)#sflow 1 polling ethernet 1/g1-1/g10 200
interfaces poll-interval
interfaces
n means once in n seconds a counter sample is generated. (Range:
1029