Dell PowerConnect M6348 Cli Reference Manual page 644

User Guidelines
This command has no user guidelines.
Example
console(config-if-4/g1)#ipv6 mld snooping maxresponse 33
ipv6 mld snooping mcrtexpiretime
The ipv6 mld snooping mcrtexpiretime command sets the Multicast Router Present Expiration
time. The time is set for a particular interface or VLAN. This is the amount of time in seconds
that a switch waits for a query to be received on an interface before the interface is removed
from the list of interfaces with multicast routers attached. The range is 1 to 3600 seconds.
Syntax
ipv6 mld snooping mcrtexpiretime [
no ipv6 mld snooping mcrtexpiretime [
vlan_id — Specifies a VLAN ID value in VLAN Database mode.
•
seconds — multicast router present expiration time in seconds. (Range: 1–3600)
•
Default Configuration
The default multicast router present expiration time is 300 seconds.
Command Mode
Interface Configuration mode.
VLAN Database mode.
User Guidelines
This command has no user guidelines
Example
console(config-if-4/g1)#ipv6 mld snooping mcrtrexpiretime 60
ipv6 mld snooping (Global)
The ipv6 mld snooping (Global) command enables MLD Snooping on the system (Global
Config Mode).
Syntax
ipv6 mld snooping
644
vlan-id seconds
] [ ]
vlan-id
]