Dell PowerConnect M6348 Cli Reference Manual page 154

Example
The following example enables RADIUS-assigned VLANs.
console(config)#aaa authorization network default radius
enable authentication
Use the enable authentication command in Line Configuration mode to specify the
authentication method list when accessing a higher privilege level from a remote telnet or
console. To return to the default specified by the enable authentication command, use the no
form of this command.
Syntax
enable authentication {default|
no enable authentication
default — Uses the default list created with the aaa authentication enable command.
•
• list-name — Uses the indicated list created with the aaaa authentication enable command.
(Range: 1-12 characters)
Default Configuration
Uses the default set with the command aaa authentication enable.
Command Mode
Line Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example specifies the default authentication method when accessing a higher
privilege level console.
console(config)# line console
console(config-line)# enable authentication default
enable password
Use the enable password command in Global Configuration mode to set a local password to
control access to the privileged EXEC mode. To remove the password requirement, use the no
form of this command.
154
list-name
}