Area Nssa - Dell PowerConnect M6348 Cli Reference Manual

area default-cost
Use the area default-cost command in Router OSPFv3 Configuration mode to configure the
monetary default cost for the stub area. The operator must specify the area id and an integer
value between 1-16777215. Use the no form of the command to return the cost to the default
value.
Syntax
areaid
area default-cost
no area areaid default-cost
areaid — Valid area identifier.
•
cost — Default cost. (Range: 1-16777215)
•
Default Configuration
This command has no default configuration.
Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example configures the monetary default cost at 100 for stub area 1.
console(config)#ipv6 router ospf
console(config-rtr)#area 1 default-cost 100

area nssa

Use the area nssa command in Router OSPFv3 Configuration mode to configure the specified
areaid to function as an NSSA.
Syntax
areaid
area nssa
areaid
no area nssa
areaid — Valid OSPFv3 area identifier.
•
cost
797