Example
The following example displays the OSPF stub table.
console#show ipv6 ospf stub table
AreaId
------------ -------------
0.0.0.10
show ipv6 ospf virtual-link
Use the show ipv6 ospf virtual-link command in Privileged EXEC mode to display the OSPF
Virtual Interface information for a specific area and neighbor.
Syntax
show ipv6 ospf virtual-link
areaid — Identifies the OSPF area whose virtual interface information is being displayed.
•
neighbor — Router ID of neighbor.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays the OSPF Virtual Interface information for area 1 and its
neighbor.
console#show ipv6 ospf virtual-link 1 1.1.1.1
Area ID........................................ 1
Neighbor Router ID............................. 1.1.1.1
Hello Interval................................. 10
Dead Interval.................................. 40
Iftransit Delay Interval....................... 1
838
TypeofService
Metric Val
----------
Normal
areaid neighbor
Import SummaryLSA
-----------------
1
Enable