Dell PowerConnect M6348 Cli Reference Manual page 872

interface tunnel
Use the interface tunnel command in Global Configuration mode to enter the interface
configuration mode for a tunnel.
Syntax
interface tunnel
no interface tunnel
tunnel-id — Tunnel identifier. (Range: 0–7)
•
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example enables the interface configuration mode for tunnel 1.
console(config)#interface tunnel 1
console(config-if-tunnel1)#
show interfaces tunnel
Use the show interfaces tunnel command in Privileged EXEC mode to display the parameters
related to tunnel such as tunnel mode, tunnel source address and tunnel destination address.
Syntax
show interfaces tunnel [
tunnel-id — Tunnel identifier. (Range: 0–7)
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
872
tunnel-id
tunnel-id
tunnel-id
]