Dell PowerConnect M6348 Cli Reference Manual page 167

name — Access list name. (Range: Valid IP access-list name up to 31 characters in length)
•
direction — Direction of the ACL. (Range: In or out. Default is in .)
•
seqnum — Precedence for this interface and direction. A lower sequence number has higher
•
precedence. Range: 1 – 4294967295. Default is
Default Configuration
This command has no default configuration.
Command Mode
Global and Interface Configuration
User Guidelines
Global mode command configures the ACL on all the interfaces, whereas the interface mode
command does so for the interface.
Examples
console(config)#ip access-group aclname in
console(config)#no ip access-group aclname in
console(config)#ip access-group aclname1 out
console(config-if-1/g1)#ip access-group aclname out 2
console(config-if-1/g1)#no ip access-group aclname out
ip access-group <name> out
Use the ip access-group <name> out command in Interface Configuration mode to bind an IP
ACL to an interface (physical, LAG, VLAN) in the outbound direction.
Syntax
ip access-group <name> out
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration mode (physical, LAG, VLAN)
1 .
167