Dell PowerConnect M6348 Cli Reference Manual page 166

• cos — Class of service. (Range 0-7)
• log — Specifies that this rule is to be logged.
• assign-queue — Specifies particular hardware queue for handling traffic that matches the
rule.
queue-id — 0-6, where n is number of user configurable queues available for that hardware
•
platform.
• mirror — Copies the traffic matching this rule to the specified interface.
redirect — Forwards traffic matching this rule to the specified physical interface.
•
interface — Valid physical interface in unit/<port-type>port format, for example 1/g12.
•
Default Configuration
This command has no default configuration.
Command Mode
Mac-Access-List Configuration mode
User Guidelines
The no form of this command is not supported, as the rules within an ACL cannot be deleted
individually. Rather the entire ACL must be deleted and respecified.
The assign-queue and redirect parameters are only valid for permit commands.
Example
The following example configures a MAC ACL to deny traffic from MAC address
0806.c200.0000.
console(config)#mac access-list extended DELL123
console(config-mac-access-list)#deny 0806.c200.0000 ffff.ffff.ffff any
ip access-group
no ip access-group
Use the ip access-group or no ip access-group command to apply/disable an IP based egress
ACL on an Ethernet interface or a group of interfaces. An IP based ACL should have been
created by the access-list <
command.
Syntax
ip access-group
166
name
> ... command with the same name specified in this
name direction seqnum