Dell PowerConnect M6348 Cli Reference Manual page 264

clear gvrp statistics
Use the clear gvrp statistics command in Privileged EXEC mode to clear all the GVRP statistics
information.
Syntax
clear gvrp statistics [ethernet
interface — A valid Ethernet interface.
•
port-channel-number — A valid port-channel index.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example clears all the GVRP statistics information on port 1/g8.
console# clear gvrp statistics ethernet 1/g8
garp timer
Use the garp timer command in Interface Configuration mode to adjust the GARP application
join, leave, and leaveall GARP timer values. To reset the timer to default values, use the no form
of this command.
Syntax
garp timer {join | leave | leaveall}
no garp timer
join — Indicates the time in centiseconds that PDUs are transmitted.
•
• leave — Indicates the time in centiseconds that the device waits before leaving its GARP
state.
• leaveall — Used to confirm the port within the VLAN. The time is the interval between
messages sent, measured in centiseconds.
264
interface
| port-channel
timer_value
port-channel-number
]