Area Stub No-Summary - Dell PowerConnect M6348 Cli Reference Manual

Example
The following example creates an area range for the area 1 NSSA.
console(config)#ipv6 router ospf
console(config-rtr)#area 1 range 2020:1::1/64 summarylink
area stub
Use the area stub command in Router OSPFv3 Configuration mode to create a stub area for the
specified area ID. A stub area is characterized by the fact that AS External LSAs are not
propagated into the area. Removing AS External LSAs and Summary LSAs can significantly
reduce the link state database of routers within the stub area.
Syntax
areaid
area stub
areaid
no area stub
areaid — Valid OSPFv3 area identifier.
•
Default Configuration
This command has no default configuration.
Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example creates a stub area for area 1.
console(config)#ipv6 router ospf
console(config-rtr)#area 1 stub

area stub no-summary

Use the area stub no-summary command in Router OSPFv3 Configuration mode to disable the
import of Summary LSAs for the stub area identified by
Syntax
areaid
area stub no-summary
areaid.
803