Dell PowerConnect M6348 Cli Reference Manual page 510

Syntax
show port protocol {
groupid — The protocol-based VLAN group ID, which is automatically generated when you
•
create a protocol-based VLAN group with the vlan protocol group command.
• all — Enter all to show all interfaces.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the Protocol-Based VLAN information for either the entire
system.
console#show port protocol all
Group Name
---------------
test
show switchport protected
Use the show switchport protected command in Privileged EXEC mode to display the status of
all the interfaces, including protected and unprotected interfaces.
Syntax
show switchport protected
groupid — Identifies which group the port is to be protected in. (Range: 0-2)
•
Default Configuration
This command has no default configuration.
510
groupid
| all}
Group
ID Protocol(s
----- ----------
1 IP
groupid
VLAN Interface(s)
---- ------------------------
1 1/g1