Show Ipv6 Ospf Database - Dell PowerConnect M6348 Cli Reference Manual

Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
console#show ipv6 ospf asbr
Type Router Id
---- ---------
INTRA 1.1.1.1
INTRA 4.4.4.4

show ipv6 ospf database

Use the show ipv6 ospf database command in Privileged EXEC mode to display information
about the link state database when OSPFv3 is enabled. If no parameters are entered, the
command displays the LSA headers. Optional parameters specify the type of link state
advertisements to display.
The information below is only displayed if OSPF is enabled.
Syntax
show ipv6 ospf [
nssa-external | prefix | router | unknown [area | as | link]}] [
originate]
areaid — Identifies a specific OSPF area for which link state database information will be
•
displayed.
• external — Displays the external LSAs.
• inter-area — Displays the inter-area LSAs.
• link — Displays the link LSAs.
• network — Displays the network LSAs.
• nssa-external — Displays NSSA external LSAs.
826
Cost Area ID
---- --------
10 0.0.0.1
10 0.0.0.1
areaid
] database [{external | inter-area {prefix | router} | link | network |
Next Hop
-----------------------
FE80::213:C4FF:FEDB:6C41
FE80::210:18FF:FE82:8E1
lsid
] [adv-router [
Next Hop
Intf
-------
vlan10
vlan12
rtrid
] | self-