Dell PowerConnect M6348 Cli Reference Manual page 145

5 - Display operational code vital product data
6 - Run flash diagnostics
7 - Update boot code
8 - Delete backup image
9 - Reset the system
10 - Restore configuration to factory defaults (delete config
files)
11 - Activate Backup Image
12 - Password Recovery Procedure
[Boot Menu] 30
Monitoring Traps from CLI
It is possible to connect to the CLI session and monitor the events or faults that are being sent
as traps from the system. This feature is equivalent to the alarm-monitoring window in a typical
network management system. The user enables events or monitor traps from the CLI by
entering the command logging console. Traps generated by the system are dumped to all CLI
sessions that have requested monitoring mode to be enabled. The no logging console command
disables trap monitoring for the session. By default, console logging is enabled.
145