Dell PowerConnect M6348 Cli Reference Manual page 65

Command line interface guide
Hide thumbs Also See for PowerConnect M6348:
Table of Contents

Advertisement

Command
match dstl4port
match ethertype
match ip6flowlbl
match ip dscp
match ip precedence
match ip tos
match protocol
match source-address mac
match srcip
match srcip6
match srcl4port
match vlan
mirror
police-simple
policy-map
redirect
service-policy
Description
Adds to the specified class definition a match condition
based on the destination layer 4 port of a packet using a
single keyword, or a numeric notation.
Adds to the specified class definition a match condition
based on the value of the ethertype.
Adds to the specified class definition a match condition
based on the IPv6 flow label of a packet.
Adds to the specified class definition a match condition
based on the value of the IP DiffServ Code Point (DSCP)
field in a packet.
Adds to the specified class definition a match condition
based on the value of the IP.
Adds to the specified class definition a match condition
based on the value of the IP TOS field in a packet.
Adds to the specified class definition a match condition
based on the value of the IP Protocol field in a packet using
a single keyword notation or a numeric value notation.
Adds to the specified class definition a match condition
based on the source MAC address of the packet.
Adds to the specified class definition a match condition
based on the source IP address of a packet.
Adds to the specified class definition a match condition
based on the source IPv6 address of a packet.
Adds to the specified class definition a match condition
based on the source layer 4 port of a packet using a single
keyword, a numeric notation, or a numeric range notation.
Adds to the specified class definition a match condition
based on the value of the layer 2 VLAN Identifier field.
Mirrors all the data that matches the class defined to the
destination port specified
Establishes the traffic policing style for the specified class.
Establishes a new DiffServ policy
Specifies that all incoming packets for the associated traffic
stream are redirected to a specific egress interface (physical
port or port-channel).
Attaches a policy to an interface in a particular direction.
Mode*
CMC
CMC
v6CMC
CMC
CMC
CMC
CMC
CMC
CMC
v6CMC
CMC
CMC
PCMC
PCMC
GC
PCMC
GC and
IC
65

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents