Dell PowerConnect M6348 Cli Reference Manual page 312

name — Alphanumeric string of 1 to 31 characters uniquely identifying the IPv6 access list.
•
Default Configuration
There is no default configuration for this command.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command
Example
The following example creates an IPv6 ACL named "DELL_IP6" and enters the IPv6-Access-
List Config mode:
console(config)#ipv6 access-list DELL_IP6
console(Config-ipv6-acl)#
ipv6 access-list rename
The ipv6 access-list rename command changes the name of an IPv6 Access Control List (ACL).
This command fails if an IPv6 ACL with the new name already exists.
Syntax
ipv6 access-list rename
name — the name of an existing IPv6 ACL.
•
newname — alphanumeric string from 1 to 31 characters uniquely identifying the IPv6 access
•
list.
Default Configuration
There is no default configuration for this command.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
312
name newname