Dell PowerConnect M6348 Cli Reference Manual page 610

Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example attempts to display a table of information about multicast groups that
IGMP Proxy reported.
console#show ip igmp-proxy groups
Interface Index................................ vlan13
Group Address
Mode Sources
-------------
225.0.1.1
225.0.1.2
show ip igmp-proxy groups detail
Use the show ip igmp-proxy groups detail command in Privileged EXEC mode to display
complete information about multicast groups that IGMP Proxy has reported.
Syntax
show ip igmp-proxy groups detail
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
610
Last Reporter Up Time
--------------- -------
13.13.13.1 7
13.13.13.1 48
Member State Filter
------------ ----------- ------
DELAY-MEMBER Exclude
DELAY-MEMBER Exclude
0
0