Ip Helper-Address (Global Configuration) - Dell PowerConnect M6348 Cli Reference Manual

clear ip helper statistics
Use the clear ip helper statistics command to reset to 0 the statistics displayed in show ip helper
statistics.
Syntax
clear ip helper statistics
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
console#clear ip helper statistics

ip helper-address (global configuration)

Use the ip helper-address (global configuration) command to configure the relay of certain
UDP broadcast packets received on any interface. To delete an IP helper entry, use the no form
of this command.
Syntax
ip helper-address
nameserver | netbios-dgm | netbios-ns | ntp | pim-auto-rp | rip | tacacs | tftp | time ]
no ip helper-address [
nameserver | netbios-dgm | netbios-ns | ntp | pim-auto-rp | rip | tacacs | tftp | time ]
server-address — The IPv4 unicast or directed broadcast address to which relayed UDP
•
broadcast packets are sent. The server address cannot be an IP address configured on any
interface of the local router.
• dest-udp-port — A destination UDP port number from 0 to 65535.
port-name — The destination UDP port may be optionally specified by its name. Whether a
•
port is specified by its number or its name has no effect on behavior. The names recognized
are as follows: dhcp (port 67), domain (port 53), isakmp (port 500), mobile-ip (port 434),
614
server-address dest-udp-port
[
server-address dest-udp-port
] [
| dhcp | domain | isakmp | mobile-ip |
| dhcp | domain | isakmp | mobile-ip |