Area Virtual-Link - Dell PowerConnect M6348 Cli Reference Manual

areaid
no area
areaid — Valid OSPFv3 area identifier.
•
Default Configuration
This command has no default configuration.
Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example prevents Summary LSAs from being advertised into the area 1 NSSA.
console(config)#ipv6 router ospf
console(config-rtr)#area 1 stub no-summary

area virtual-link

Use the area virtual-link command in Router OSPFv3 Configuration mode to create the OSPF
virtual interface for the specified
delete an OSPF virtual interface in an area.
Syntax
areaid
area
areaid
no area
areaid — Valid OSPFv3 area identifier (or decimal value in the range of 0-4294967295).
•
neighbor-id — Identifies the Router ID or IP address of the neighbor.
•
Default Configuration
This command has no default configuration.
Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
This command has no user guidelines.
804
stub no-summary
areaid
neighbor-id
virtual-link
neighbor-id
virtual-link
neighbor
and . Use the no area virtual-link command to