Dell PowerConnect M6348 Cli Reference Manual page 568

bootpdhcprelay cidridoptmode
Use the bootpdhcprelay cidridoptmode command in Global Configuration mode to enable the
circuit ID option and remote agent ID mode for BootP/DHCP Relay on the system. Use the no
form of the command to disable the circuit ID option and remote agent ID mode for
BootP/DHCP Relay.
Syntax
bootpdhcprelay cidridoptmode
Default Configuration
Disabled is the default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example enables the circuit ID and remote agent ID options.
console(config)#bootpdhcprelay cidridoptmode
Circuit Id and Remote Agent Id Mode set Successfully.
bootpdhcprelay maxhopcount
Use the bootpdhcprelay maxhopcount command in Global Configuration mode to configure
the maximum allowable relay agent hops for BootP/DHCP Relay on the system. Use the no
form of the command to set the maximum hop count to the default value.
Syntax
bootpdhcprelay maxhopcount
no bootpdhcprelay maxhopcount
integer — Maximum allowable relay agent hops for BootP/DHCP Relay on the system.
•
(Range: 1-16)
Default Configuration
The default
568
integer
integer
configuration is 4.