Ipv6 Mld Last-Member-Query-Count - Dell PowerConnect M6348 Cli Reference Manual

Default Configuration
No IPv6 hosts are defined.
Command Mode
Global Configuration mode.
User Guidelines
This command has no user guidelines.
Example
console(config)#ipv6 host Dell 2001:DB8::/32

ipv6 mld last-member-query-count

The ipv6 mld last-member-query-count command sets the number of listener-specific queries
sent before the router assumes that there are no local members on the interface. Use the "no"
form of this command to set the last member query count to the default.
Syntax
last-member-query-count
ipv6 mld last-member-query-count
no ipv6 mld last-member-query-count
last-member-query-count — Query count (Range: 1–20).
•
Default Configuration
The default last member query count is 2.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-vlan3)#ipv6 mld last-member-query-count 5
669