Dell PowerConnect M6348 Cli Reference Manual page 170

mac access-list extended rename
Use the mac access-list extended rename command in Global Configuration mode to rename
the existing MAC Access Control List (ACL).
Syntax
mac access-list extended rename
name — Existing name of the access list. (Range: 1-31 characters)
•
newname — New name of the access list. (Range: 1-31 characters)
•
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
Command fails if the new name is the same as the old one.
Example
The following example shows the mac access-list extended rename command.
console(config)#mac access-list extended rename DELL1 DELL2
show ip access-lists
Use the show ip access-lists command in Privileged EXEC mode to display access lists applied
on interfaces and all rules that are defined for the access lists.
Syntax
show ip access-lists
accesslistname — The name used to identify the ACL. The range is 1-31 characters.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
170
name newname
accesslistname