Dell PowerConnect M6348 Cli Reference Manual page 351

User Guidelines
This command has no user guidelines.
Example
The following example displays how enable the transmission of local data.
console(config-if-1/g3)#lldp transmit
lldp transmit-mgmt
Use the lldp transmit-mgmt command in Interface Configuration mode to include
transmission of the local system management address information in the LLDPDUs. To cancel
inclusion of the management information, use the no form of this command.
Syntax
lldp transmit-mgmt
no lldp transmit-mgmt
Default Configuration
By default, management address information is not included.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to include management information in the LLDPDU.
console(config-if-1/g3)#lldp transmit-mgmt
lldp transmit-tlv
Use the lldp transmit-tlv command in Interface Configuration mode to specify which optional
type-length-value settings (TLVs) in the 802.1AB basic management set will be transmitted in
the LLDPDUs. To remove an optional TLV, use the no form of this command.
Syntax
lldp transmit-tlv [sys-desc][sys-name][sys-cap][port-desc]
no lldp transmit-tlv [sys-desc][sys-name][sys-cap][port-desc]
351