Area Nssa Default-Info-Originate - Dell PowerConnect M6348 Cli Reference Manual

Default Configuration
This command has no default configuration.
Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example configures area 1 to function as an NSSA.
console(config)#ipv6 router ospf
console(config-rtr)#area 1 nssa

area nssa default-info-originate

Use the area nssa default-info-originate command in Router OSPFv3 Configuration mode to
configure the metric value and type for the default route advertised into the NSSA. The
optional metric parameter specifies the metric of the default route. The metric type can be
comparable (nssa-external 1) or noncomparable (nssa-external 2). Use the no form of the
command to return the metric value and type to the default value
Syntax
areaid
area
areaid
no area
areaid — Valid OSPFv3 area identifier.
•
metric — Metric value for default route. (Range: 1-16777214)
•
• comparable — Metric Type (nssa-external 1).
• non-comparable — Metric Type (nssa-external 2).
Default Configuration
If no metric is defined, 10 is the default configuration.
Command Mode
Router OSPFv3 Configuration mode.
798
nssa default-info-originate [
nssa default-info-originate
metric
[comparable | non-comparable]]