Dell PowerConnect M6348 Cli Reference Manual page 973

management access-class
Use the management access-class command in Global Configuration mode to restrict
management connections. To disable restriction, use the no form of this command.
Syntax
management access-class {console-only|
no management access-class
name — A valid access-list name. (Range: 1–32 characters)
•
• console-only — The switch can be managed only from the console.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures an access-list called
console(config)# management access-class mlist
management access-list
Use the management access-list command in Global Configuration mode to define an access
list for management, and enter the access-list for configuration. Once in the access-list
configuration mode, the denied or permitted access conditions are configured with the deny
and permit commands. To remove an access list, use the no form of this command.
Syntax
management access-list
no management access-list
name — The access list name. (Range: 1–32 characters)
•
Default Configuration
This command has no default configuration.
name
name
name
}
mlist
as the management access-list.
973