Area Virtual-Link Transmit-Delay - Dell PowerConnect M6348 Cli Reference Manual

Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example configures the retransmit interval of 20 seconds for the OSPF virtual
interface on the virtual interface identified by area 1 and its neighbor.
(config)#ipv6 router ospf
(config-rtr)#area 1 virtual-link 2 retransmit-interval 20

area virtual-link transmit-delay

Use the area virtual-link transmit-delay command in Router OSPFv3 Configuration mode to
configure the transmit delay for the OSPF virtual interface on the virtual interface identified by
areaid neighbor
and .
Syntax
areaid
area virtual-link
areaid
no area virtual-link
areaid — Valid OSPFv3 area identifier.
•
neighbor — Router ID of neighbor.
•
seconds — Transmit delay interval. (Range: 0-3600)
•
Default Configuration
1 is the default value for
Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example configures a 20-second transmit delay for the OSPF virtual interface on
the virtual interface identified by area 1 and its neighbor.
neighbor
transmit-delay
neighbor
transmit-delay
seconds
.
seconds
807