Dell PowerConnect M6348 Cli Reference Manual page 488

spanning-tree transmit hold-count
Use the spanning-tree transmit hold-count command to set the maximum number of BPDUs
that a bridge is allowed to send within a hello time window (2 seconds). Use the "no" form of
this command to reset the hold count to the default value.
Syntax
value
spanning-tree transmit hold-count [ ]
no spanning-tree transmit hold-count
value — The maximum number of BPDUs to send (Range: 1–10).
•
Default Configuration
The default hold count is 6 BPDUs.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example sets the maximum number of BPDUs sent to 6.
console(config)#spanning-tree transmit hold-count 6
488