Dell PowerConnect M6348 Cli Reference Manual page 569

Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example defines a maximum hopcount of 6.
console(config)#bootpdhcprelay maxhopcount 6
bootpdhcprelay minwaittime
Use the bootpdhcprelay minwaittime command in Global Configuration mode to configure
the minimum wait time in seconds for BootP/DHCP Relay on the system. When the BOOTP
relay agent receives a BOOTREQUEST message, it might use the seconds-sinceclient- began-
booting field of the request as a factor in deciding whether to relay the request or not. Use the
no form of the command to set the minimum wait time to the default value.
Syntax
integer
bootpdhcprelay minwaittime
no bootpdhcprelay minwaittime
integer — Minimum wait time for BootP/DHCP Relay on the system. (Range: 0-100 seconds)
•
Default Configuration
integer
0 is the default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example defines a minimum wait time of 10 seconds.
console(config)#bootpdhcprelay minwaittime 10
569