boot host auto-save
The boot host auto-save command enables/disables the option to automatically save
configuration files downloaded to the switch by Auto Config.
Syntax
boot host auto-save
no boot host auto-save
Default Configuration
The downloaded configuration is not automatically saved by default.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines
Example
console#no boot host auto-save
boot host dhcp
The boot host dhcp command is used to enable/disable Auto Config on the switch.
Syntax
boot host dhcp
no boot host dhcp
Default Configuration
Auto Config is enabled.
Command Mode
Global Configuration.
User Guidelines
This command has no user guidelines
892