Dell PowerConnect M6348 Cli Reference Manual page 687

Example
The following example displays the IPv6 status of forwarding mode and IPv6 unicast routing
mode.
console#show ipv6 brief
IPv6 Forwarding Mode........................... Enable
IPv6 Unicast Routing Mode...................... Disable
IPv6 Hop Limit..................................1
show ipv6 interface
Use the show ipv6 interface command in Privileged EXEC mode to show the usability status of
IPv6 interfaces.
Syntax
show ipv6 interface {brief|loopback
loopback-id — Valid loopback interface ID
•
tunnel-id — Valid tunnel interface ID
•
• vlan-id — Valid VLAN ID.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Examples
The following examples show the usability status of a IPv6 VLAN interface individually and all
IPv6 interfaces collectively in an abbreviated format.
console#show ipv6 interface vlan 3
IPv6 is enabled
IPv6 Prefix is ...................... FE80::2FC:E3FF:FE90:147/128
Routing Mode................................... Enabled
loopback-id tunnel-id
| tunnel
3FF0:1236:C261::1/64
vlan-id
|vlan [ prefix ] }
687