Area Nssa Translator-Stab-Intv; Area Range; Area Stub - Dell PowerConnect M6348 Cli Reference Manual

Command

area nssa translator-stab-intv

area range

area stub

area stub no-summary
area virtual-link
area virtual-link dead-interval
area virtual-link hello-interval
area virtual-link retransmit-
interval
area virtual-link transmit-delay
default-information originate
default-metric
distance ospf
enable
exit-overflow-interval
external-lsdb-limit
ipv6 ospf
ipv6 ospf areaid
ipv6 ospf cost
ipv6 ospf dead-interval
ipv6 ospf hello-interval
ipv6 ospf mtu-ignore
ipv6 ospf network
ipv6 ospf priority
Description
Configures the translator stability interval of the NSSA.
Creates an area range for a specified NSSA.
Creates a stub area for the specified area ID.
Disables the import of Summary LSAs for the stub area
areaid.
identified by
Creates the OSPF virtual interface for the specified
neighbor
and .
Configures the dead interval for the OSPF virtual interface
on the virtual interface identified by
Configures the hello interval for the OSPF virtual interface
on the virtual interface identified by
Configures the retransmit interval for the OSPF virtual
interface on the virtual interface identified by
neighbor
.
Configures the transmit delay for the OSPF virtual
interface on the virtual interface identified by
neighbor
.
Controls the advertisement of default routes.
Sets a default for the metric of distributed routes.
Sets the route preference value of OSPF in the router.
Resets the default administrative mode of OSPF in the
router (active).
Configures the exit overflow interval for OSPF.
Configures the external LSDB limit for OSPF.
Enables OSPF on a router interface or loopback interface.
Sets the OSPF area to which the specified router interface
belongs.
Configures the cost on an OSPF interface.
Sets the OSPF dead interval for the specified interface.
Sets the OSPF hello interval for the specified interface.
Disables OSPF maximum transmission unit (MTU)
mismatch detection.
Changes the default OSPF network type for the interface.
Sets the OSPF priority for the specified router interface.
Mode*
ROSV3
ROSV3
ROSV3
ROSV3
areaid
ROSV3
ROSV3
areaid neighbor
and .
ROSV3
areaid neighbor
and .
ROSV3
areaid
and
ROSV3
areaid
and
ROSV3
ROSV3
ROSV3
ROSV3
ROSV3
ROSV3
IC
IC
IC
IC
IC
IC
IC
IC
87