Dell PowerConnect M6348 Cli Reference Manual page 322

Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
When the optional argument vlan vlan-id is not used, the command shows the following
information:
MLD Snooping Querier Mode
Querier Address
MLD Version
Querier Query Interval
Querier Expiry Interval
When the optional argument vlan vlan-id is used, the following additional information appears:
MLD Snooping Querier VLAN
Mode
Querier Election Participate Mode Indicates whether the MLD Snooping Querier participates in querier
Querier VLAN Address
Operational State
Operational Version
322
Indicates whether or not MLD Snooping Querier is active on the
switch.
Shows the IP Address which will be used in the IPv6 header while
sending out MLD queries.
Indicates the version of MLD that will be used while sending out the
queries. This is defaulted to MLD v1 and it can not be changed.
Shows the amount of time that a Snooping Querier waits before
sending out a periodic general query.
Displays the amount of time to wait in the Non-Querier operational
state before moving to a Querier state.
Indicates whether MLD Snooping Querier is active on the VLAN.
election if it discovers the presence of a querier in the VLAN.
Shows the IP Address which will be used in the IPv6 header while
sending out MLD queries.
Indicates whether MLD Snooping Querier is in "Querier" or "Non-
Querier" state. When the switch is in Querier state it will send out
periodic general queries. When in Non-Querier state it will wait for
moving to Querier state and does not send out any queries.
Indicates the version of MLD that will be used while sending out the
queries. This is defaulted to MLD v1 and it can not be changed.