Dell PowerConnect M6348 Cli Reference Manual page 132

Management ACL
In addition to user access control, the system also manages the access level for particular
management interfaces. The system allows individual hosts or subnets to access only specific
management protocols.
The user defines a management profile, which identifies management protocols such as the
following:
• Telnet.
• SSH and the keying information to use for SSH.
• HTTP.
• HTTPS and the security certificate to be used.
• SNMPv1/v2c and the read and read/write community strings to be used.
• SNMPv3 and the security information for used this protocol.
For each of these management profiles, the user defines the list of hosts or subnets from which
the management profiles may be used.
Other CLI Tools and Capabilities
The CLI has several other capabilities associated with its primary functions.
Terminal Paging
The terminal width and length for CLI displays is 79 characters and 25 lines, respectively. The
length setting is used to control the number of lines the CLI will display before it pauses. For
example, the CLI pauses at 24 lines and prompts the user with the
line. The CLI waits for the user to press either <q> or any other key. If the user presses any key
except <q>, the CLI shows the next page. A <q> key stops the display and returns to the CLI
prompt.
Boot Message
The boot message is a system message that is not user-configurable and is displayed when the
system is booting. Displayed information includes the following:
• Operational code date
• The board type
• The CPU
• Memory size
To start the normal booting process, select item 1 in the Boot Menu. The following is a
PCM6348 sample log for booting information.
Boot Menu Version: 12 May 2009
132
-more-
prompt on the 25th