Dell PowerConnect M6348 Cli Reference Manual page 700

Bad Checksum MLD Packets
Malformed MLD Packets
Example
console#show ipv6 mld traffic
Valid MLD Packets Received..................... 52
Valid MLD Packets Sent......................... 7
Queries Received............................... 0
Queries Sent................................... 7
Reports Received............................... 52
Reports Sent................................... 0
Leaves Received................................ 0
Leaves Sent.................................... 0
show ipv6 neighbors
Use the show ipv6 neighbors command in Privileged EXEC mode to display information about
the IPv6 neighbors.
Syntax
show ipv6 neighbors
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays information about the IPv6 neighbors.
console(config)#show ipv6 neighbors
700
The number of bad checksum MLD packets received by the router.
The number of malformed MLD packets received by the router.