Passive-Interface Default; Redistribute - Dell PowerConnect M6348 Cli Reference Manual

Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-router)#passive-interface vlan 1

passive-interface default

The passive-interface default command enables the global passive mode by default for all
interfaces. It overrides any interface level passive mode. Use the "no" form of this command to
disable the global passive mode by default for all interfaces. Any interface previously configured
to be passive reverts to non-passive mode.
Syntax
passive-interface default
no passive-interface default
Default Configuration
Global passive mode is disabled by default.
Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-rtr)#passive-interface default

redistribute

Use the redistribute command in Router OSPFv3 Configuration mode to configure the
OSPFv3 protocol to allow redistribution of routes from the specified source protocol/routers.
Syntax
metric tag
redistribute {static | connected} [metric ] [metric-type {1 | 2}] [tag ]
821