Show Snmp Users - Dell PowerConnect M6348 Cli Reference Manual

----------------- ------
user-group
The following table contains field descriptions.
Field
Name
Security Model
Security Level
Views

show snmp users

Use the show snmp users Privileged EXEC command to display the configuration of users.
Syntax
show snmp users [
username — Specifies the name of the user. (Range: 1-30)
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the configuration of users with the user name specified.
1042
Model
------
V3 Auth-Priv
Description
Name of the group
SNMP model in use (v1, v2 or v3)
Authentication of a packet with encryption. Applicable only to SNMP Version 3
security model.
• Read–A string that is the name of the view that enables you only to view the contents
of the agent. If unspecified, all the objects except the community-table and SNMPv3
user and access tables are available.
• Write–A string that is the name of the view that enables you to enter data and manage
the contents of the agent.
• Notify–A string that is the name of the view that enables you to specify an inform or a
trap.
username
]
Level Read
-------- -------- -------
Default
Write Notify
"" ""