Dell PowerConnect M6348 Cli Reference Manual page 320

no ipv6 mld snooping querier election participate
vlan-id — A valid VLAN ID. (Range: 1 - 4093)
•
Default Configuration
Election participation is disabled by default.
Command Mode
VLAN Database mode
User Guidelines
There are no user guidelines for this command.
Example
console(config-vlan)#ipv6 mld snooping querier election
participate 10
ipv6 mld snooping querier query-interval
Use the ipv6 mld snooping querier query-interval command to set the MLD Querier Query
Interval time. It is the amount of time in seconds that the switch waits before sending another
general query. Use the "no" form of this command to reset the Query Interval to the default.
Syntax
ipv6 mld snooping querier query-interval
ipv6 mld snooping querier query-interval
interval — Amount of time that the switch waits before sending another general query.
•
(Range: 1–1800 seconds)
Default Configuration
The default query interval is 60 seconds.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command
320
vlan-id
interval