Area Virtual-Link Retransmit-Interval - Dell PowerConnect M6348 Cli Reference Manual

Syntax
areaid
area
areaid
no area
areaid — Valid OSPFv3 area identifier.
•
neighbor — Router ID of neighbor.
•
• seconds — Hello interval. (Range: 1-65535)
Default Configuration
10 is the default value for
Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example configures a hello interval of 20 seconds for the OSPF virtual interface
on the virtual interface identified by area 1 and its neighbor.
console(config)#ipv6 router ospf
console(config-rtr)#area 1 virtual-link 2 hello-interval 20

area virtual-link retransmit-interval

Use the area virtual-link retransmit-interval command in Router OSPFv3 Configuration mode
to configure the retransmit interval for the OSPF virtual interface on the virtual interface
identified by
Syntax
areaid
area
areaid
no area
areaid — Valid OSPFv3 area identifier.
•
neighbor — Router ID of neighbor.
•
seconds — Retransmit interval. (Range: 0-3600)
•
Default Configuration
5 is the default value for
806
neighbor
virtual-link hello-interval
neighbor
virtual-link
seconds
.
areaid neighbor
and .
neighbor
virtual-link retransmit-interval
neighbor
virtual-link
seconds
.
seconds
hello-interval
seconds
retransmit-interval